Cable Tester CT30

The cable tester CT30 presents itself as particularly compact as well as with a robust metal casing and modern design. Operation takes place via large buttons and the display on the device or via an external keyboard. Various interfaces and a variable sequence control allows the device to not only be used as a stand-alone cable tester, but also to be implemented as a master or slave. As a master, the cable tester CT30 can integrate and control other subsystems; as a slave, the perfect integration into your existing or planned environment or machine is also possible. Through precise, analog measurement technology, not only are qualitative high-class results achieved during testing of the pure wire harness, but are also covered by other electrical or electronic components in the area of testing.

Areas of Application

The cable tester CT30 is deployed in the quality control for the production test and final inspection of wire harnesses and electrical or electronic components. The scope ranges from simple computer cables up to wire harnesses of medium complexity for the automotive industry.

Features

• Continuity Test and Short-Circuit Test
• Testing of resistors, diodes and capacitors
• Testing of optical fibers
• Plug-in slots for four internal test point cards, up to  512 internal test points
• Externally or with an additional test case the are 2048 points possible
• Test & measurement with TP-cards and DIO-Bus
• Standard mini-PC as a basis for excellent power reserves (test speed)
• Large memory (256 Mbytes)
• Complete equipment with standard interfaces in the back panel:
  - VGA, keyboard, mouse
  - USB, serial port, parallel port
  - Ethernet
• Front plate with LC-display and numerical keyboard, pin socket and USB
• Casing with integrated power supply and ventilator
• Test-option TAS, for the programming of own test and function procedures
• Programming according to "golden samples" (autoprog)
• LED-activation in test modules for identification of locations and failures
• PIN number function
• Data transfer to the PC via Ethernet or USB
• Programming with the testing software CS WIN (CS WIN license required)
• Recording of statistical data
• Arbitrarily programmable inputs and outputs (8/8)
• Extended area of the power source up to 200 mA (integrated relay test)

Technical Specifications: CT30

• Testing Current: 1 µA up to 20 mA
• Testing voltage: 0-15 V
• Continuity test via threshold identification: 20 Ohm up to 10 KOhm
• Short-circuit test via threshold identification: 10 kOhm up to 1 MOhm
• Resistance measurement: 5 Ohm up to 1 MOhm, accuracy 2 % ± 2 Ohm
• Capacity measurement: 10 nF up to 10 µF, accuracy 10 % ± 10 nF
• Diode test: Zener (up to 11 V), Si, Ge
• Digital output DO: max. 300 mA
• PC / Memory: CPU: 633 MHz, 256 Mbyte RAM, 64 Mbyte Flash
• Power supply: 115...230 V~ (wide range power adaptor)
• Dimensions (W x H x D): 380 x 160 x 220 mm
• Weight: ca. 4.5 Kg (without TP-cards)

Data Sheet (PDF)